Sta-Rite 5P6R Swimming Pool Pump – 2HP – THREE PHASE

The Sta-Rite 5P6R series pumps are designed for the higher volume semi-commercial or commercial installation.

£749.00 inc VAT (£624.17 exc VAT)

In stock

Product reference: 3125 Category:

Description

Sta-Rite 5P6RG-3 Swimming Pool Pump – Three Phase
The LA Sta-Rite HD – 5P6R series pumps are designed for the higher volume semi-commercial or commercial installation.
Sta-Rite highly recommended the installation post pump of the serviceable check valve to inhibit impellor spin-off due to back pressures.
The pump can suction lift up to 4.5m and has 2″ BSP Threaded intake & discharge for higher pumping volumes.
We have also included in the list an engineers secret tool called ‘Magic Lube’, this is a highly viscous long term silicone lubricant which is perfect for sealing the O-rings on unions, simply smear onto your o rings for a perfect seal. Can also be used on pump basket O-rings or filter lid O-rings.
Heavy Duty Motor50 Hz motors are designed for continuous, quiet operation – feature stainless steel one piece shaft, sealed and permanently lubricated bearings – runs cooler for prolonged life under high ambient conditions
Self-priming diffuserSelf Priming Diffuser design makes this our fastest priming pool pump… incomparable!
“See Thru” trap lidEliminates all the guesswork – you see when the basket needs cleaning – designed to withstand 4 bar test pressure as well as high vacuum conditions. New Quick-Lock trap cover ring permits fast access to the strainer basket.
Exclusive “lock-in” 5″ Diameter basket prevents large debris from clogging the impeller.

Pump Power Conversions
KiloWatts Horse Power
0.25 Kw 0.33 HP
0.375 Kw 0.5 HP
0.55 Kw 0.75 HP
0.75 Kw 1.0 HP
1.12 Kw 1.5 HP
1.5 Kw 2.0 HP
2.25 Kw 3.0 HP

Three Phase 415V pumps. If you are unsure, you must check with your qualified Electrician who can advise you on your requirements.
The Pump is configured with 1 1/2″ female parallel threads for both the horizontal intake and the vertical discharge.
We recommend you use P.T.F.E tape or LA-CO Slic-Tite to apply to the male thread on your pump unions. please order your unions if required from the pipework section. The 1 1/2″ male threaded unions are ideal if you are connecting your remaining pipework with normal solvent weld fittings.
We also recommend the use of the Anti-vibration pad, as this allows the pump to be installed onto various floor surfaces with the added sound & vibration deadening benefit the pads give.

Sta-Rite 5P6RG-3 Spec Sheet

Download Sta-rite-5P6R-datasheet-CLS24.pdf

Pentair Sta-Rite 5P6R - Manual

Download Sta-rite-5P6R-Manual-CLS24.pdf

Warranty & Returns

Warranty
This Product has a 3 year warranty on the pump wet end, 2 year warranty on the pump motor and 1 year warranty on the mechanical seal.

Please note that all pumps are factory wet tested, so a small amount of water may still be present in the pump.

Warranty will be void if damage is due to chemical or sand/grit damage to the seals of this pump. This pump cannot be run dry as this WILL damage the shaft seal.

Returns
This product is fully CE but as an Electrical product please ensure it is fitted by a Part P qualified Electrician. Warranty claims due to incorrect wiring of these pumps will not be classed as a valid claim.

N.B. The correct wiring diagram is found on the inside of the Electrical connection terminal box.

Should you require any further information, please email info@comls.co.uk where we will respond to your request quickly.

Stock & Delivery

Stock
This product is a 1 – 3 day delivery direct from our supplier, and is currently in stock.

Delivery – Mainland UK

Orders placed before 2pm Monday to Friday we aim to dispatch on the same day, after 2pm will be the following working day. This does not include Bank Holidays, which are classed as non-working days. Should you require a Saturday delivery or have any other delivery enquiries, please email info@comls.co.uk  who will respond to your request quickly.

Try to include your mobile phone number in the checkout area so that our delivery drivers can contact you should they need any further assistance or clarification in delivering your order.

Please ensure you leave detailed information if your delivery address is hard to find or a new housing development. If you know there is a possibility of missing the delivery, you can at the checkout stage leave instructions for the delivery driver to leave without signature and place your goods with a neighbour or in a discreet place out of sight for your later retrieval.

Please note some areas including Scotland(post codes AB, FK, IV, KW, PA, PH, HS, KA, ZE, TR, DD,PH, PA, KY, AB, DD, KW, IV, HS), Isle of Wight, Isle of Man, will need extra carriage. We no longer ship to Jersey, Guernsey or Northern Ireland.

PLEASE CHECK YOUR DELIVERY

If you are unable to thoroughly check your delivery upon receipt, sign for it as UNCHECKED. If the package is damaged in any way, no matter how small, please sign for it as DAMAGED. We CANNOT CLAIM from our carriers for any damaged items that have not been signed for as UNCHECKED or DAMAGED.

If you sign for a delivery as OK, which you later find to be damaged, our carriers WILL NOT accept liability and you may be charged for the damaged items, in this case a delivery charge for replacement items WILL be made.